zudo-led-lamp
GitHub repository

Type to search...

to open search from anywhere

AL8860MP-13

buck LED driver — Diodes Incorporated — C500782 — board-l U2 — rec-al8860mp-13

Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.

This record in the catalog: AL8860MP-13

Identity

FieldRecorded value
Record IDrec-al8860mp-13
Record kindstandalone
Manufacturer part numberAL8860MP-13
ManufacturerDiodes Incorporated
Functionbuck LED driver
LCSC IDC500782
PackageMSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-EP1.8
Inventory lineline-c500782
Also known ashysteretic LED driver
Owner skillcomponent-al8860mp-13

Fit: Fitted

Identity state: UNRESOLVED

Source state: SOURCE UNAVAILABLE

Coverage: 1 open of 4 published

Documents and package

Footprint preview

Footprint preview for MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-EP1.8
Shared footprint package: MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-EP1.8. Open SVG

Package model

Shared footprint package: MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-EP1.8. Open model file

Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Selected document: Datasheet PDF — AL8860 40V 1.5A Buck LED Driver

Selected source ID: src-al8860-ds39014

Authority: MANUFACTURER_PRIMARY

Availability: AVAILABLE

Package footprint: MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-EP1.8

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Placements

Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.

BoardReference designator
board-lU2

Coverage

Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.

pin-topology-and-ep

Coverage ID: cov-al8860-pin-topology · Status: COVERED

Reason: fact-al8860-topology, fact-al8860-pin-ep, fact-al8860-project-nets

Facts in this domain:

limits-control-timing-faults

Coverage ID: cov-al8860-limits-control · Status: COVERED

Reason: fact-al8860-vin-recommended-max through fact-al8860-faults, plus fact-al8860-duty-band (DS39014 Rev 8-2, Electrical Characteristics table row DSW Recommended Duty Cycle Range, re-verified 2026-08-02 against the currently live diodes.com PDF, hash-matched to the retained mirror)

Facts in this domain:

layout-and-thermal

Coverage ID: cov-al8860-layout · Status: COVERED

Reason: fact-al8860-layout

Facts in this domain:

led-string-voltage-temperature

Coverage ID: cov-al8860-led-domain · Status: OPEN

Reason: Exact LED VF versus current/temperature and switching-node overshoot require the LED/integration records and bench waveform.

Facts in this domain: none are recorded against it.

Blocked by: no blocking fact is recorded. What is missing has not been reduced to a specific recorded fact, so the reason above is the whole of what is known.

Facts

Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.

ABSOLUTE_MAXIMUM

A never-exceed limit. Reaching it may damage the part; it is not an operating target and there is no margin implied by it.

Fact: fact-al8860-vin-absolute-max

Value: 42 · Unit: V

Conditions: stress rating only, TA=25 C

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Absolute Maximum Ratings table row VIN

The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.

Fact: fact-al8860-topology

Value: hysteretic buck LED driver with integrated NDMOS and high-side current sense · Unit: NONE

Conditions: normal buck operation

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Section Application Information and Figure Typical Application Circuit

Fact: fact-al8860-pin-ep

Value: EP connects to GND thermal mass but is not an electrical ground conduction path · Unit: NONE

Conditions: MSOP-8EP package

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Pin Descriptions table row EP

Fact: fact-al8860-vin-recommended-max

Value: 40 · Unit: V

Conditions: functional input range, TA=25 C unless specified

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Recommended Operating Conditions table row VIN

Fact: fact-al8860-ctrl

Value: floating gives normal operation; below 0.2 V disables; 0.3-2.5 V analog dims; PWM below 500 Hz preserves best range · Unit: NONE

Conditions: CTRL pin operation

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Pin Descriptions table row CTRL and Application Information section PWM Dimming

Fact: fact-al8860-min-on-time

Value: 500 · Unit: ns

Conditions: recommended minimum switch on-time for 4% accuracy

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Electrical Characteristics table row tON_REC

Fact: fact-al8860-max-frequency

Value: 1 · Unit: MHz

Conditions: recommended maximum switch frequency

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Electrical Characteristics table row fSW(MAX)

Fact: fact-al8860-inductance-min

Value: 33 · Unit: uH

Conditions: recommended AL8860 inductor range

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Section Inductor Selection row recommended range

Fact: fact-al8860-inductance-max

Value: 100 · Unit: uH

Conditions: recommended AL8860 inductor range

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Section Inductor Selection row recommended range

Fact: fact-al8860-faults

Value: open LED stops oscillation; shorted LED chain remains regulated but changes duty and frequency; OTP restarts after hysteresis · Unit: NONE

Conditions: documented open, short, and overtemperature states

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Sections Thermal Protection, Open Circuit LEDs, and LED Chain Shorted Together

Fact: fact-al8860-duty-band

Value: 25 to 75 · Unit: %

Conditions: DSW parameter, internal buck-switch operating duty-cycle recommended range, guaranteed by design; distinct from the 98% DSW(MAX) absolute maximum duty cycle and from the 5-100% CTRL-pin analog-dimming range

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Electrical Characteristics table row DSW Recommended Duty Cycle Range

GUARANTEED_ELECTRICAL

A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.

Fact: fact-al8860-sense-min

Value: 0.096 · Unit: V

Conditions: SET relative to VIN, TA=25 C unless specified

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Electrical Characteristics table row VSENSE minimum

Fact: fact-al8860-sense-max

Value: 0.104 · Unit: V

Conditions: SET relative to VIN, TA=25 C unless specified

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Electrical Characteristics table row VSENSE maximum

Fact: fact-al8860-ripple-fraction

Value: 0.4 · Unit: ratio

Conditions: internally set coil peak-to-peak ripple relative to ILED

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Section Inductor Selection equation definitions row delta-I

THERMAL_SOA

Thermal and safe-operating-area behaviour: how much the part may dissipate, and under what mounting and ambient conditions.

Fact: fact-al8860-layout

Value: place input capacitor and inductor close; use low-resistance SW path; connect EP to thermal mass · Unit: NONE

Conditions: MSOP-8EP implementation

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: Pin Descriptions table row EP and Sections Capacitor Selection and Inductor Selection

PROJECT_STATE

A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.

Fact: fact-al8860-manufacturer

Value: Diodes Incorporated · Unit: NONE

Conditions: exact AL8860MP-13 orderable identity

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-al8860-ds39014: title block and ordering table row AL8860MP-13

Fact: fact-al8860-current-min

Value: 0.4752475247524752 · Unit: A

Conditions: CTRL floating, minimum sense threshold and maximum initial sense resistance at 25 C; TCR and self-heating unresolved

Verdict: NEEDS BENCH · Provenance: CALCULATED

Evidence: src-al8860-ds39014 — CALCULATED: fact-al8860-sense-min divided by fact-rlp25-resistance-max

Fact: fact-al8860-current-max

Value: 0.5252525252525252 · Unit: A

Conditions: CTRL floating, maximum sense threshold and minimum initial sense resistance at 25 C; TCR and self-heating unresolved

Verdict: NEEDS BENCH · Provenance: CALCULATED

Evidence: src-al8860-ds39014 — CALCULATED: fact-al8860-sense-max divided by fact-rlp25-resistance-min

Fact: fact-al8860-peak-current

Value: 0.6303030303030303 · Unit: A

Conditions: upper sense threshold, minimum initial 1% sense resistance, half of 40% peak-to-peak ripple above mean; TCR and self-heating unresolved

Verdict: NEEDS BENCH · Provenance: CALCULATED

Evidence: src-al8860-ds39014 — CALCULATED: fact-al8860-current-max times one plus fact-al8860-ripple-fraction divided by two

Fact: fact-al8860-project-nets

Value: U2.8=V15; U2.1=SET; U2.4=CTRL; U2.5/6=LED_N; U2.2/3/9=GND; U2.7=NC · Unit: NONE

Conditions: current generated Board L source

Verdict: NOT APPLICABLE · Provenance: PROJECT-CHOICE

Evidence: src-al8860-generator: COMPONENTS table row U2, NETS rows, and NO_CONNECT row U2.7

Calculation dependencies

These values were derived from other recorded facts rather than read from a document. The expression and every input are published so the number can be recomputed instead of trusted. A derived value is never stronger than the weakest fact it depends on.

Fact: fact-al8860-current-min

Expression: fact_al8860_sense_min / fact_rlp25_resistance_max

Depends on:

Fact: fact-al8860-current-max

Expression: fact_al8860_sense_max / fact_rlp25_resistance_min

Depends on:

Fact: fact-al8860-peak-current

Expression: fact_al8860_current_max * (1 + fact_al8860_ripple_fraction / 2)

Depends on:

Pin maps

The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.

pinmap-al8860

  • Symbol: AL8860MP-13

  • Footprint: MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL-EP1.8

  • Pins: 9

Pin assignments
Symbol pinNameFootprint padFunction
1SET1sense input; Board L SET
2GND2ground
3GND3ground
4CTRL4PWM/analog control
5SW5switch drain; LED_N
6SW6switch drain; LED_N
7NC7no connection
8VIN8V15 input
9EP9GND thermal pad, not current-return substitute

Interactions

Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.

int-al8860-control

  • Records involved: rec-al8860mp-13 (this record)

  • Conditions: CTRL driven by Board L PWM_DIM with analog/PWM state and frequency verified

  • Verdict: NEEDS BENCH

Facts this rests on:

int-al8860-power-stage

  • Records involved: rec-al8860mp-13 (this record), rec-rlp25feer200, rec-fxl0630-330-m, rec-ro-ss26

  • Conditions: full LED-string VF/temperature, V15 transient, layout parasitics, and PWM operating envelope

  • Verdict: NEEDS BENCH

Facts this rests on:

Cross-component rules

Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.

  • rule-rail-envelope — rail-envelope — rule verdict: UNSOURCED — Whether every part on the input rail stays inside its own recorded limits across a legal power contract, a mis-contract, and a transient clamp event.

  • rule-usb-pd-nvm-load-switch — usb-pd-nvm-load-switch — rule verdict: UNSOURCED — How the power-delivery controller's stored configuration and its enable output drive the load switch, through every state from detached to fault.

  • rule-al8860-led-stage — al8860-led-stage — rule verdict: NEEDS BENCH — How the LED driver, its sense resistor, inductor, catch diode and per-branch ballast behave together across the LED forward-voltage, tolerance and temperature envelope.

  • rule-evidence-chain — source-to-bench-chain — rule verdict: NEEDS BENCH — How far each claim has travelled from a manufacturer document towards a measurement on real hardware, stage by stage.

  • rule-c5446803-power-cut — board-mounted lamp power switching — rule verdict: NEEDS BENCH

All cross-component rules

Sources

Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.

AL8860 40V 1.5A Buck LED Driver

Source ID: src-al8860-ds39014 · Authority: MANUFACTURER_PRIMARY

FieldRecorded value
Document numberDS39014
RevisionRev. 8-2
Document date2026-04
Retrieved2026-08-02
Printed page2 of 18

Locator: Pin Descriptions table; Absolute Maximum and Recommended Operating Conditions tables; Electrical Characteristics table; Application Information sections

Availability: AVAILABLE

Document URL: https://www.diodes.com/datasheet/download/AL8860.pdf

Board L generated schematic specification

Source ID: src-al8860-generator · Authority: PROJECT_GENERATOR

FieldRecorded value
Document numberscripts/schgen/board_l_spec.py
Revision410bc1a342286dd6c205d6dcec0f248b8a963987
Document date2026-08-02
Retrieved2026-08-02
Printed pagesource file

Locator: COMPONENTS table row U2 and NETS rows V15, SET, LED_N, CTRL, PWM_DIM, and GND

Availability: AVAILABLE

Document URL: https://raw.githubusercontent.com/Takazudo/zudo-led-lamp/410bc1a342286dd6c205d6dcec0f248b8a963987/scripts/schgen/board\_l\_spec.py

Legend

What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.

Verdict

Recorded termWhat it means
NEEDS BENCHCannot be settled from documents. It needs measurement on real hardware before it can be relied on.
NOT APPLICABLEThe parameter does not apply to this part as it is used here.
PASS - primary-source confirmedConfirmed against the manufacturer's own document for this exact part.

Provenance

Recorded termWhat it means
CALCULATEDDerived arithmetically from other facts listed here. The expression and every input are shown, so the number can be recomputed rather than trusted.
PRIMARY-SPECTaken from the manufacturer's own specification document.
PROJECT-CHOICEA decision made by this project. No vendor asserts it.

Fact class

Recorded termWhat it means
ABSOLUTE_MAXIMUMA never-exceed limit. Reaching it may damage the part; it is not an operating target and there is no margin implied by it.
GUARANTEED_ELECTRICALA parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.
PROJECT_STATEA value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.
RECOMMENDED_OPERATIONThe range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.
THERMAL_SOAThermal and safe-operating-area behaviour: how much the part may dissipate, and under what mounting and ambient conditions.

Coverage status

Recorded termWhat it means
COVEREDEvery question this domain asks is answered by the facts listed against it.
OPENUnresolved. Open means the question has not been answered, not that the part is unsafe — the reason states what is missing.

Source availability

Recorded termWhat it means
AVAILABLEThe document was retrieved and is on record.

Source authority

Recorded termWhat it means
MANUFACTURER_PRIMARYThe manufacturer's own document for this exact part.
PROJECT_GENERATORA document this project generated, such as a schematic or netlist export.

Identity state

Recorded termWhat it means
UNRESOLVEDThe exact orderable part is not yet confirmed. Substituting a same-name part from another vendor is not permitted on that basis.

Source state

Recorded termWhat it means
SOURCE UNAVAILABLENo document backing this line could be retrieved.

Unit

Recorded termWhat it means
NONEThe value is not a physical quantity, so it carries no unit. Recorded as `NONE`.

Raw agent resource

This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.

Open the owning bundle component-al8860mp-13