CL31A106KBHNNNE

10 uF 50 V MLCC — Samsung Electro-Mechanics — C13585 — board-p C1; board-l C10, C11, C12, C14 — rec-c13585

Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.

This record in the catalog: CL31A106KBHNNNE

Identity

• Record ID: rec-c13585

• Record kind: standalone

• Manufacturer part number: CL31A106KBHNNNE

• Manufacturer: Samsung Electro-Mechanics

• Function: 10 uF 50 V MLCC

• LCSC ID: C13585

• Package: C1206

• Inventory line: line-c13585

• Owner skill: component-project-passives

• Fit: Fitted

• Identity state: UNRESOLVED

• Source state: SOURCE UNAVAILABLE

• Coverage: 3 open of 5 published

Component references

Selected document

Specification PDF

Samsung Electro-Mechanics SPECIFICATION (Reference Sheet) and MLCC Product Manual for CL31A106KBHNNNE

Authority

MANUFACTURER_PRIMARY

Availability

AVAILABLE

Footprint preview

Footprint preview for C1206

Package model

Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Interactive 3D view of shared footprint package C1206

Placements

Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.

Coverage

Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.

identity-and-rated-capacitance

• Coverage ID: cov-c13585-identity

• Status: COVERED

Reason: fact-c13585-manufacturer; fact-c13585-capacitance; fact-c13585-voltage

Facts in this domain:

• fact-c13585-manufacturer

• fact-c13585-capacitance

• fact-c13585-voltage

dielectric-temperature-and-termination

• Coverage ID: cov-c13585-temp

• Status: COVERED

Reason: fact-c13585-dielectric; fact-c13585-package

Facts in this domain:

• fact-c13585-dielectric

• fact-c13585-package

effective-capacitance-under-installed-bias

• Coverage ID: cov-c13585-bias

• Status: OPEN

Reason: fact-c13585-curve-caveat: installed voltage/curve point is not retained

Facts in this domain:

• fact-c13585-curve-caveat

Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.

• fact-c13585-curve-caveat

aging-at-installed-condition

• Coverage ID: cov-c13585-aging

• Status: OPEN

Reason: fact-c13585-curve-caveat: exact aging data/condition is not retained

Facts in this domain:

• fact-c13585-curve-caveat

Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.

• fact-c13585-curve-caveat

ripple-current-under-installed-layout

• Coverage ID: cov-c13585-ripple

• Status: OPEN

Reason: fact-c13585-curve-caveat: typical curve is not a guaranteed layout-specific limit

Facts in this domain:

• fact-c13585-curve-caveat

Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.

• fact-c13585-curve-caveat

Facts

Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.

ABSOLUTE_MAXIMUM

A never-exceed limit. Reaching it may damage the part; it is not an operating target and there is no margin implied by it.

GUARANTEED_ELECTRICAL

A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.

TYPICAL_CURVE

A representative figure read from a characteristic curve. Typical values are not guaranteed and vary part to part.

PROJECT_STATE

A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.

Pin maps

The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.

pinmap-c13585

• Symbol: CL31A106KBHNNNE

• Footprint: C1206

• Pins: 2

Interactions

Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.

int-c13585-placement

• Records involved: rec-c13585 (this record)

• Conditions: C1 and Board L C10/C11/C12/C14 placements; effective capacitance is conditional

• Verdict: NEEDS BENCH

Facts this rests on:

• fact-c13585-capacitance

• fact-c13585-voltage

• fact-c13585-curve-caveat

Cross-component rules

Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.

• rule-rail-envelope — rail-envelope — rule verdict: UNSOURCED — Whether every part on the input rail stays inside its own recorded limits across a legal power contract, a mis-contract, and a transient clamp event.

All cross-component rules

Sources

Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.

Samsung Electro-Mechanics SPECIFICATION (Reference Sheet) and MLCC Product Manual for CL31A106KBHNNNE

• Source ID: src-c13585-page

• Document number: CL31A106KBHNNNE

• Revision: Issued 2024-05-09

• Document date: 2024-05-09

• Retrieved: 2026-08-02

• Authority: MANUFACTURER_PRIMARY

• Locator: Physical page 1, Section A Samsung Part Number and Section B Structure & Dimension; physical page 2, Section C reliability table

• Printed page: 1 (first sheet)

• Availability: AVAILABLE

• Document URL: https://product.samsungsem.com/part/download.do?masterKey=CL31A106KBHNNN\&type=specsheet

Samsung Electro-Mechanics MLCC catalog

• Source ID: src-c13585-catalog

• Document number: MLCC_2512

• Revision: December 2025

• Document date: 2025-12-01

• Retrieved: 2026-08-02

• Authority: MANUFACTURER_PRIMARY

• Locator: Part Numbering, size/delectric/termination code tables

• Printed page: 06

• Availability: AVAILABLE

• Document URL: https://www.samsungsem.com/resources/file/jp/support/product\_catalog/MLCC\_2512.pdf

Legend

What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.

Verdict

Provenance

Fact class

Coverage status

Source availability

Source authority

Identity state

Source state

Unit

Raw agent resource

This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.

Open the owning bundle component-project-passives