0603WAF0000T5E

zero-Ohm CCDB bridge — UNI-ROYAL — C21189 — board-p R19, R20 — rec-c21189

Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.

This record in the catalog: 0603WAF0000T5E

Identity

Record ID: rec-c21189
Record kind: standalone
Manufacturer part number: 0603WAF0000T5E
Manufacturer: UNI-ROYAL
Function: zero-Ohm CCDB bridge
LCSC ID: C21189
Package: R0603
Inventory line: line-c21189
Owner skill: component-project-passives
Fit: Fitted
Identity state: UNRESOLVED
Source state: SOURCE UNAVAILABLE
Coverage: 1 open of 2 published

Component references

Selected document

Specification PDF

UNI-ROYAL Thick Film Chip Resistors

Authority: MANUFACTURER_PRIMARY
Availability: AVAILABLE

Footprint preview

Package model

Shared footprint package: R0603

Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Placements

Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.

Board	Reference designator
board-p	`R19`
board-p	`R20`

Coverage

Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.

zero-ohm-resistance-current-and-temperature

Coverage ID: cov-c21189-jumper
Status: COVERED

Reason: fact-c21189-jumper-resistance; fact-c21189-rated-current; fact-c21189-overload-current; fact-c21189-temperature

Facts in this domain:

fact-c21189-jumper-resistance
fact-c21189-rated-current
fact-c21189-overload-current
fact-c21189-temperature

pulse-energy-at-installed-waveform

Coverage ID: cov-c21189-pulse
Status: OPEN

Reason: fact-c21189-pulse-caveat

Facts in this domain:

fact-c21189-pulse-caveat

Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.

fact-c21189-pulse-caveat

Facts

Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.

RECOMMENDED_OPERATION

The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.

Fact	Value	Unit	Conditions	Verdict	Provenance	Evidence
`fact-c21189-rated-current`	1	`A`	0603 jumper rated current	PASS - primary-source confirmed	PRIMARY-SPEC	src-c21189-uniroyal: page 5, Ratings table, 0603 row
`fact-c21189-temperature`	-55 to +155 C	`NONE`	0603 jumper operating temperature	PASS - primary-source confirmed	PRIMARY-SPEC	src-c21189-uniroyal: page 5, Ratings table, 0603 row

GUARANTEED_ELECTRICAL

A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.

Fact	Value	Unit	Conditions	Verdict	Provenance	Evidence
`fact-c21189-jumper-resistance`	less than 50 milliohm	`NONE`	0603 jumper; do not model as an ideal zero	PASS - primary-source confirmed	PRIMARY-SPEC	src-c21189-uniroyal: page 5, Ratings table, 0603 row

TRANSIENT

Behaviour during a short event — startup, a switching edge, a fault or a surge.

Fact	Value	Unit	Conditions	Verdict	Provenance	Evidence
`fact-c21189-overload-current`	2	`A`	0603 jumper maximum overload current	PASS - primary-source confirmed	PRIMARY-SPEC	src-c21189-uniroyal: page 5, Ratings table, 0603 row
`fact-c21189-pulse-caveat`	Jumper pulse energy at the installed CCDB waveform is unknown	`NONE`	rated/overload current alone does not specify pulse energy	NEEDS BENCH	PRIMARY-SPEC	src-c21189-uniroyal: page 5, Ratings table, 0603 jumper row

PROJECT_STATE

A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.

Fact	Value	Unit	Conditions	Verdict	Provenance	Evidence
`fact-c21189-manufacturer`	UNI-ROYAL	`NONE`	exact orderable 0603WAF0000T5E	PASS - primary-source confirmed	PRIMARY-SPEC	Section evidence, src-c21189-uniroyal: page 2, Scope paragraph 1.1 and Part No. System
`fact-c21189-ccdb-topology`	Fitted R19/R20 bridge CC1/CC2 to CC1DB/CC2DB; R17/R18 external-Rd 5.1k options are DNP	`NONE`	current generated Board P netlist	NOT APPLICABLE	REFERENCE-DESIGN	src-c21189-generator: NETS mapping, rows CC1, CC2, CC1DB and CC2DB

Pin maps

The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.

pinmap-c21189

Symbol: 0603WAF0000T5E
Footprint: R0603
Pins: 2

Pin assignments

Symbol pin	Name	Footprint pad	Function
`1`	`terminal-1`	`1`	passive terminal
`2`	`terminal-2`	`2`	passive terminal

Interactions

Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.

int-c21189-ccdb

Records involved: rec-c21189 (this record)
Conditions: R19/R20 fitted bridges are separate from DNP R17/R18 external-Rd options
Verdict: NEEDS BENCH

Facts this rests on:

fact-c21189-ccdb-topology
fact-c21189-rated-current
fact-c21189-overload-current
fact-c21189-pulse-caveat

Cross-component rules

Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.

rule-usb-pd-nvm-load-switch — usb-pd-nvm-load-switch — rule verdict: UNSOURCED — How the power-delivery controller's stored configuration and its enable output drive the load switch, through every state from detached to fault.

All cross-component rules

Sources

Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.

UNI-ROYAL Thick Film Chip Resistors

Source ID: src-c21189-uniroyal
Document number: SMD-SP-001
Revision: V.7
Document date: 2022-10-13
Retrieved: 2026-08-02
Authority: MANUFACTURER_PRIMARY
Locator: Ratings table, row 0603 jumper
Printed page: 5
Availability: AVAILABLE
Document URL: https://www.uni-royal.cn/en/images/userfile/file/1668661899c56505e6d9ab55c7.pdf

Board P generated schematic specification

Source ID: src-c21189-generator
Document number: board-p-spec
Revision: 59db76d801c882d2748618a4bd39495f7cf36769
Document date: 2026-08-01
Retrieved: 2026-08-02
Authority: PROJECT_GENERATOR
Locator: NETS mapping, rows CC1/CC1DB and CC2/CC2DB
Printed page: source
Availability: AVAILABLE
Document URL: https://raw.githubusercontent.com/Takazudo/zudo-led-lamp/59db76d801c882d2748618a4bd39495f7cf36769/scripts/schgen/board\_p\_spec.py

Legend

What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.

Verdict

Recorded term	What it means
`NEEDS BENCH`	Cannot be settled from documents. It needs measurement on real hardware before it can be relied on.
`NOT APPLICABLE`	The parameter does not apply to this part as it is used here.
`PASS - primary-source confirmed`	Confirmed against the manufacturer's own document for this exact part.

Provenance

Recorded term	What it means
`PRIMARY-SPEC`	Taken from the manufacturer's own specification document.
`REFERENCE-DESIGN`	Taken from a vendor reference design or application note rather than the device specification.

Fact class

Recorded term	What it means
`GUARANTEED_ELECTRICAL`	A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.
`PROJECT_STATE`	A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.
`RECOMMENDED_OPERATION`	The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.
`TRANSIENT`	Behaviour during a short event — startup, a switching edge, a fault or a surge.

Coverage status

Recorded term	What it means
`COVERED`	Every question this domain asks is answered by the facts listed against it.
`OPEN`	Unresolved. Open means the question has not been answered, not that the part is unsafe — the reason states what is missing.

Source availability

Recorded term	What it means
`AVAILABLE`	The document was retrieved and is on record.

Source authority

Recorded term	What it means
`MANUFACTURER_PRIMARY`	The manufacturer's own document for this exact part.
`PROJECT_GENERATOR`	A document this project generated, such as a schematic or netlist export.

Identity state

Recorded term	What it means
`UNRESOLVED`	The exact orderable part is not yet confirmed. Substituting a same-name part from another vendor is not permitted on that basis.

Source state

Recorded term	What it means
`SOURCE UNAVAILABLE`	No document backing this line could be retrieved.

Unit

Recorded term	What it means
`NONE`	The value is not a physical quantity, so it carries no unit. Recorded as `NONE`.

Raw agent resource

This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.

Open the owning bundle component-project-passives