SS-12D01-G020

maintained lamp power slider — G-Switch — C5446803 — board-l SW2 — rec-c5446803

Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.

This record in the catalog: SS-12D01-G020

Identity

• Record ID: rec-c5446803

• Record kind: standalone

• Manufacturer part number: SS-12D01-G020

• Manufacturer: G-Switch

• Function: maintained lamp power slider

• LCSC ID: C5446803

• Package: SW-TH_SS-12D01-G020

• Inventory line: line-c5446803

• Owner skill: component-gswitch-ss-12d01-g020

• Fit: Fitted

• Identity state: VERIFIED

• Source state: AVAILABLE

• Coverage: 3 open of 4 published

Component references

Selected document

Datasheet PDF

SS-12D01-GXXX exact G020 variant drawing

Authority

MANUFACTURER_MIRROR

Availability

AVAILABLE

Footprint preview

Footprint preview for SW-TH_SS-12D01-G020

Package model

Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Interactive 3D view of shared footprint package SW-TH_SS-12D01-G020

Placements

Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.

Coverage

Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.

identity and documented component characteristics

• Coverage ID: cov-c5446803-identity

• Status: COVERED

Reason: Exact component identity and retained authoritative evidence; installation and firmware are separate.

Facts in this domain:

• fact-c5446803-identity

manufacturer-primary source trust

• Coverage ID: cov-c5446803-open-0

• Status: OPEN

Reason: Manufacturer-authored drawing is retrieved through a distributor mirror and remains UNSOURCED under the primary-only trust contract.

Facts in this domain:

• fact-c5446803-manufacturer

• fact-c5446803-rating

• fact-c5446803-terminals

• fact-c5446803-mounting

• fact-c5446803-life

• fact-c5446803-ambient

• fact-c5446803-contact-resistance

Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.

• fact-c5446803-manufacturer

• fact-c5446803-rating

• fact-c5446803-terminals

• fact-c5446803-mounting

• fact-c5446803-life

• fact-c5446803-ambient

• fact-c5446803-contact-resistance

capacitive switching and contact wetting

• Coverage ID: cov-c5446803-open-1

• Status: OPEN

Reason: Qualify lamp inrush, restart, bounce and contact endurance at the actual load.

Facts in this domain:

• fact-c5446803-project-nets

Blocked by: no blocking fact is recorded. What is missing has not been reduced to a specific recorded fact, so the reason above is the whole of what is known.

assembled switch and OFF isolation

• Coverage ID: cov-c5446803-open-2

• Status: OPEN

Reason: Verify physical switch fit, soldering, OFF rail decay, the isolated live third terminal and service-interface back-power on a prototype.

Facts in this domain:

• fact-c5446803-project-nets

• fact-c5446803-assembly

Blocked by: no blocking fact is recorded. What is missing has not been reduced to a specific recorded fact, so the reason above is the whole of what is known.

Facts

Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.

RECOMMENDED_OPERATION

The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.

GUARANTEED_ELECTRICAL

A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.

PROJECT_STATE

A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.

Pin maps

The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.

pinmap-c5446803

• Symbol: SS-12D01-G020

• Footprint: SW-TH_SS-12D01-G020

• Pins: 3

Interactions

Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.

int-c5446803-interface

• Records involved: rec-c5446803 (this record)

• Conditions: Generated connectivity does not establish physical fit, contact behavior or installed firmware; validate the assembled prototype.

• Verdict: NEEDS BENCH

Facts this rests on:

• fact-c5446803-project-nets

Cross-component rules

Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.

• rule-c5446803-power-cut — board-mounted lamp power switching — rule verdict: NEEDS BENCH

All cross-component rules

Sources

Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.

SS-12D01-GXXX exact G020 variant drawing

• Source ID: src-c5446803-datasheet

• Document number: SS-12D01-GXXX exact G020 variant drawing

• Revision: X1

• Document date: 2019-05-29

• Retrieved: 2026-09-06

• Authority: MANUFACTURER_MIRROR

• Locator: Title block SS-12D01-GXXX; Switch Height G020 row; dimensions and PCB LAYOUT BOTTOM VIEW figures; SCHEMATIC NON-SHORTING figure; G-Switch Specification table

• Printed page: 1

• Availability: AVAILABLE

• Document URL: https://datasheet.lcsc.com/datasheet/pdf/af2c04499242010f9bc8773a044bd472.pdf?productCode=C5446803

Board L low-profile controls design

• Source ID: src-c5446803-generator

• Document number: board-l-spec

• Revision: 3958f58fcebc0f71b3cc2adda79b7070ece1bb43

• Document date: 2026-09-06

• Retrieved: 2026-09-06

• Authority: PROJECT_GENERATOR

• Locator: COMPONENTS table RV1/SW2/R22/R27/C22; NETS BRIGHT_WIPER/BRIGHT_ADC/V15/V15_FUSED; NO_CONNECT

• Printed page: source file

• Availability: AVAILABLE

• Document URL: https://raw.githubusercontent.com/Takazudo/zudo-led-lamp/3958f58fcebc0f71b3cc2adda79b7070ece1bb43/scripts/schgen/board\_l\_spec.py

JLCPCB C5446803 assembly listing

• Source ID: src-c5446803-jlcpcb

• Document number: JLCPCB C5446803 assembly listing

• Revision: 2026-09-06 observation

• Document date: 2026-09-06

• Retrieved: 2026-09-06

• Authority: DISTRIBUTOR_IDENTITY

• Locator: Component identity table; stock and available order quantity rows; Assembly Type and PCBA Type rows

• Printed page: 1

• Availability: AVAILABLE

• Document URL: https://jlcpcb.com/partdetail/C5446803

Legend

What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.

Verdict

Provenance

Fact class

Coverage status

Source availability

Source authority

Identity state

Source state

Unit

Raw agent resource

This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.

Open the owning bundle component-gswitch-ss-12d01-g020