FXL0630-330-M
33 uH LED buck inductor — Changjiang Microelectronics Tech — C177245 — board-l L1 — rec-fxl0630-330-m
Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.
This record in the catalog: FXL0630-330-M
Subordinate record
This is a subordinate record. It is a component in its own right, with its own orderable identity and its own placements, but its evidence is audited as part of rec-al8860mp-13, because its behaviour is only meaningful in that part's circuit. Read the parent record for the shared context; the facts below are the ones specific to this line.
Identity
| Field | Recorded value |
|---|---|
| Record ID | rec-fxl0630-330-m |
| Record kind | subordinate |
| Manufacturer part number | FXL0630-330-M |
| Manufacturer | Changjiang Microelectronics Tech |
| Function | 33 uH LED buck inductor |
| LCSC ID | C177245 |
| Package | IND-SMD_L7.0-W6.6_FXL0630 |
| Inventory line | line-c177245 |
| Also known as | AL8860 inductor |
| Owner skill | component-al8860mp-13 |
Fit: Fitted
Identity state: UNRESOLVED
Source state: SOURCE UNAVAILABLE
Coverage: 2 open of 2 published
Documents and package
Specification PDF
Footprint preview
IND-SMD_L7.0-W6.6_FXL0630. Open SVGPackage model
Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.
This geometry represents a shared footprint package and may not exactly match the manufacturer part.
Selected document: Specification PDF — Specification of Cjiang Products - FXL Series
Selected source ID: src-fxl-series-mirror
Authority: MANUFACTURER_MIRROR
Availability: AVAILABLE
Package footprint: IND-SMD_L7.0-W6.6_FXL0630
This geometry represents a shared footprint package and may not exactly match the manufacturer part.
Placements
Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.
| Board | Reference designator |
|---|---|
| board-l | L1 |
Coverage
Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.
inductance-dcr-current-package
Coverage ID: cov-fxl-electrical · Status: OPEN
Reason: A direct cjiang.com.cn primary-retrieval attempt on 2026-08-02 (src-fxl-series-official) confirmed manufacturer identity, inductance, tolerance, DCR max, absolute-maximum voltage, temperature range, and package against the manufacturer's own site, and its typical Isat/Irms figures (2.5 A / 2 A) match the mirror's typical column exactly. However, that document shows only a single typical-labeled Isat/Irms column, not the mirror's separate max-design column, so the mirror's max-design fact-fxl-isat-max (2.1 A) and fact-fxl-irated-max (1.8 A) remain unsourced at primary, and fact-fxl-isat-margin (which depends on fact-fxl-isat-max) and fact-fxl-rating-definitions stay open.
Facts in this domain:
Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.
self-resonance-and-end-application-temperature
Coverage ID: cov-fxl-open · Status: OPEN
Reason: The exact FXL0630 table does not state SRF, and mirror current ratings require end-application temperature/ripple verification.
Facts in this domain: none are recorded against it.
Blocked by: no blocking fact is recorded. What is missing has not been reduced to a specific recorded fact, so the reason above is the whole of what is known.
Facts
Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.
ABSOLUTE_MAXIMUM
A never-exceed limit. Reaching it may damage the part; it is not an operating target and there is no margin implied by it.
Fact: fact-fxl-voltage-max
Value: 30 · Unit: V
Conditions: FXL series absolute maximum voltage
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-fxl-series-official: Notes row 6, absolute maximum voltage DC30V
RECOMMENDED_OPERATION
The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.
Fact: fact-fxl-temperature
Value: -55 to +125 C including self-heating · Unit: NONE
Conditions: end-application part temperature
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-fxl-series-official: Notes rows 2 and 5, operating temperature range and part-temperature limit
GUARANTEED_ELECTRICAL
A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.
Fact: fact-fxl-inductance
Value: 33 · Unit: uH
Conditions: 100 kHz, 1 V, 25 C ambient
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-fxl-series-official: Ratings table row FXL0630-330-M inductance
Fact: fact-fxl-tolerance
Value: 0.2 · Unit: ratio
Conditions: 100 kHz, 1 V inductance tolerance
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-fxl-series-official: Product Identification table, tolerance code M = +/-20%
Fact: fact-fxl-dcr-max
Value: 0.31 · Unit: ohm
Conditions: 25 C ambient
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-fxl-series-official: Ratings table row FXL0630-330-M DCR maximum
THERMAL_SOA
Thermal and safe-operating-area behaviour: how much the part may dissipate, and under what mounting and ambient conditions.
Fact: fact-fxl-isat-max
Value: 2.1 · Unit: A
Conditions: DC current at approximately 30% inductance drop, table max-design column, 25 C ambient; a manufacturer-primary retrieval attempt (src-fxl-series-official, 2026-08-02) located only a single typical-labeled Isat column (2.5 A) for this row, not a separate max-design column, so this specific 2.1 A max-design figure remains mirror-only
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-fxl-series-mirror: Appendix A table row FXL0630-330-M Isat and Notes row 3
Fact: fact-fxl-irated-max
Value: 1.8 · Unit: A
Conditions: DC current causing stated max-column temperature-rise criterion from 25 C ambient; a manufacturer-primary retrieval attempt (src-fxl-series-official, 2026-08-02) located only a single typical-labeled Irms column (2 A) for this row, not a separate max-design column, so this specific 1.8 A max-design figure remains mirror-only
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-fxl-series-mirror: Appendix A table row FXL0630-330-M Irms and Notes rows 4-6
Fact: fact-fxl-rating-definitions
Value: Isat is about 30% L drop; table distinguishes max and typical current columns; part temperature must remain <=125 C · Unit: NONE
Conditions: 25 C reference ambient; end-application thermal verification required
Verdict: NEEDS BENCH · Provenance: UNVERIFIED
PROJECT_STATE
A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.
Fact: fact-fxl-manufacturer
Value: Changjiang Microelectronics Tech · Unit: NONE
Conditions: exact C177245 orderable identity
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-fxl-series-official: title block SZ CJIANG TECHNOLOGY CO.,LTD
Fact: fact-fxl-inductance-min
Value: 26.400000000000002 · Unit: uH
Conditions: lower initial inductance tolerance at 100 kHz, 1 V before DC bias
Verdict: PASS - primary-source confirmed · Provenance: CALCULATED
Evidence: src-fxl-series-official — CALCULATED: fact-fxl-inductance times one minus fact-fxl-tolerance
Fact: fact-fxl-package
Value: 7.0 +/-0.3 by 6.6 +/-0.2 by 2.8 +/-0.2 mm; two-terminal nonpolar winding · Unit: NONE
Conditions: FXL0630 package and recommended land orientation
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-fxl-series-official: Dimensions table row A-E and recommended land pattern
Fact: fact-fxl-project-nets
Value: L1.1=SET; L1.2=LED_P · Unit: NONE
Conditions: current generated Board L source
Verdict: NOT APPLICABLE · Provenance: PROJECT-CHOICE
Evidence: src-fxl-generator: COMPONENTS table row L1 and NETS rows SET and LED_P
Fact: fact-fxl-isat-margin
Value: 1.4696969696969697 · Unit: A
Conditions: mirror max-design Isat minus calculated AL8860 upper peak current; temperature dependence unresolved
Verdict: NEEDS BENCH · Provenance: CALCULATED
Evidence: src-fxl-series-mirror — CALCULATED: fact-fxl-isat-max minus fact-al8860-peak-current
Calculation dependencies
These values were derived from other recorded facts rather than read from a document. The expression and every input are published so the number can be recomputed instead of trusted. A derived value is never stronger than the weakest fact it depends on.
Fact: fact-fxl-inductance-min
Expression: fact_fxl_inductance * (1 - fact_fxl_tolerance)
Depends on:
Fact: fact-fxl-isat-margin
Expression: fact_fxl_isat_max - fact_al8860_peak_current
Depends on:
fact-al8860-peak-currenton AL8860MP-13
Pin maps
The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.
pinmap-fxl0630
Symbol:
FXL0630-330-MFootprint:
IND-SMD_L7.0-W6.6_FXL0630Pins: 2
Pin assignments
| Symbol pin | Name | Footprint pad | Function |
|---|---|---|---|
1 | SET | 1 | driver/sense side |
2 | LED_P | 2 | LED-string positive side |
Interactions
Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.
int-al8860-power-stage
Records involved:
rec-al8860mp-13,rec-rlp25feer200,rec-fxl0630-330-m(this record),rec-ro-ss26Conditions: full LED-string VF/temperature, V15 transient, layout parasitics, and PWM operating envelope
Verdict: NEEDS BENCH
Facts this rests on:
fact-al8860-peak-currenton AL8860MP-13fact-rlp25-power-marginon RLP25FEER200fact-ss26-voltage-marginon SS26fact-ss26-current-marginon SS26
int-fxl-energy-storage
Records involved:
rec-fxl0630-330-m(this record)Conditions: worst-case ripple, bias, ambient, and self-heating
Verdict: NEEDS BENCH
Facts this rests on:
Cross-component rules
Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.
rule-al8860-led-stage— al8860-led-stage — rule verdict: NEEDS BENCH — How the LED driver, its sense resistor, inductor, catch diode and per-branch ballast behave together across the LED forward-voltage, tolerance and temperature envelope.
Sources
Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.
Specification of Cjiang Products - FXL Series
Source ID: src-fxl-series-mirror · Authority: MANUFACTURER_MIRROR
| Field | Recorded value |
|---|---|
| Document number | FXL series |
| Revision | 3.0 |
| Document date | 2024-03-25 |
| Retrieved | 2026-08-02 |
| Printed page | unprinted physical page 10 |
Locator: Appendix A Electrical Characteristics table row FXL0630-330-M and Notes rows 1-7
Availability: AVAILABLE
Document URL: https:
Board L generated schematic specification
Source ID: src-fxl-generator · Authority: PROJECT_GENERATOR
| Field | Recorded value |
|---|---|
| Document number | scripts/schgen/board_l_spec.py |
| Revision | 410bc1a342286dd6c205d6dcec0f248b8a963987 |
| Document date | 2026-08-02 |
| Retrieved | 2026-08-02 |
| Printed page | source file |
Locator: COMPONENTS table row L1 and NETS rows SET and LED_P
Availability: AVAILABLE
FXL0630 Series Specification For Approval, Wire Wound Molded SMD Power Inductors
Source ID: src-fxl-series-official · Authority: MANUFACTURER_PRIMARY
| Field | Recorded value |
|---|---|
| Document number | not stated |
| Revision | 0 |
| Document date | 2019-11-21 |
| Retrieved | 2026-08-02 |
| Printed page | 5 |
Locator: Title block (SZ CJIANG TECHNOLOGY CO.,LTD); Product Identification decode; Dimensions table row A-E; Ratings table row FXL0630-330-M; Notes rows 1-2 and 5-6
Availability: AVAILABLE
Document URL: http:
Legend
What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.
Verdict
| Recorded term | What it means |
|---|---|
NEEDS BENCH | Cannot be settled from documents. It needs measurement on real hardware before it can be relied on. |
NOT APPLICABLE | The parameter does not apply to this part as it is used here. |
PASS - primary-source confirmed | Confirmed against the manufacturer's own document for this exact part. |
UNSOURCED | No accepted source backs this value yet. Treat it as a claim, not a fact. |
Provenance
| Recorded term | What it means |
|---|---|
CALCULATED | Derived arithmetically from other facts listed here. The expression and every input are shown, so the number can be recomputed rather than trusted. |
PRIMARY-SPEC | Taken from the manufacturer's own specification document. |
PROJECT-CHOICE | A decision made by this project. No vendor asserts it. |
UNVERIFIED | Recorded, but not yet backed by an accepted source. |
Fact class
| Recorded term | What it means |
|---|---|
ABSOLUTE_MAXIMUM | A never-exceed limit. Reaching it may damage the part; it is not an operating target and there is no margin implied by it. |
GUARANTEED_ELECTRICAL | A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values. |
PROJECT_STATE | A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification. |
RECOMMENDED_OPERATION | The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum. |
THERMAL_SOA | Thermal and safe-operating-area behaviour: how much the part may dissipate, and under what mounting and ambient conditions. |
Coverage status
| Recorded term | What it means |
|---|---|
OPEN | Unresolved. Open means the question has not been answered, not that the part is unsafe — the reason states what is missing. |
Source availability
| Recorded term | What it means |
|---|---|
AVAILABLE | The document was retrieved and is on record. |
Source authority
| Recorded term | What it means |
|---|---|
MANUFACTURER_MIRROR | A copy of a manufacturer document hosted elsewhere. Usable, but weaker than the manufacturer's own copy. |
MANUFACTURER_PRIMARY | The manufacturer's own document for this exact part. |
PROJECT_GENERATOR | A document this project generated, such as a schematic or netlist export. |
Identity state
| Recorded term | What it means |
|---|---|
UNRESOLVED | The exact orderable part is not yet confirmed. Substituting a same-name part from another vendor is not permitted on that basis. |
Source state
| Recorded term | What it means |
|---|---|
SOURCE UNAVAILABLE | No document backing this line could be retrieved. |
Unit
| Recorded term | What it means |
|---|---|
NONE | The value is not a physical quantity, so it carries no unit. Recorded as `NONE`. |
Raw agent resource
This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.
Open the owning bundle component-al8860mp-13