zudo-led-lamp
GitHub repository

Type to search...

to open search from anywhere

RLP25FEER200

200 mOhm current-sense resistor — TA-I Technology — C459674 — board-l RS1 — rec-rlp25feer200

Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.

This record in the catalog: RLP25FEER200

Subordinate record

This is a subordinate record. It is a component in its own right, with its own orderable identity and its own placements, but its evidence is audited as part of rec-al8860mp-13, because its behaviour is only meaningful in that part's circuit. Read the parent record for the shared context; the facts below are the ones specific to this line.

Identity

FieldRecorded value
Record IDrec-rlp25feer200
Record kindsubordinate
Manufacturer part numberRLP25FEER200
ManufacturerTA-I Technology
Function200 mOhm current-sense resistor
LCSC IDC459674
PackageR2512
Inventory lineline-c459674
Also known asAL8860 sense resistor
Owner skillcomponent-al8860mp-13

Fit: Fitted

Identity state: UNRESOLVED

Source state: SOURCE UNAVAILABLE

Coverage: 1 open of 2 published

Documents and package

Footprint preview

Footprint preview for R2512
Shared footprint package: R2512. Open SVG

Package model

Shared footprint package: R2512. Open model file

Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Selected document: Specification PDF — High Power Current Sensing Resistors RLP Series

Selected source ID: src-rlp25-spec

Authority: MANUFACTURER_PRIMARY

Availability: AVAILABLE

Package footprint: R2512

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Placements

Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.

BoardReference designator
board-lRS1

Coverage

Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.

resistance-power-tcr-overload

Coverage ID: cov-rlp25-ratings · Status: COVERED

Reason: fact-rlp25-resistance through fact-rlp25-power-margin

Facts in this domain:

project-pulse-load

Coverage ID: cov-rlp25-project-pulse · Status: OPEN

Reason: The generated design does not define startup/fault pulse energy or local resistor temperature; verify against the 5x/5 s test and derating.

Facts in this domain: none are recorded against it.

Blocked by: no blocking fact is recorded. What is missing has not been reduced to a specific recorded fact, so the reason above is the whole of what is known.

Facts

Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.

The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.

Fact: fact-rlp25-power

Value: 2 · Unit: W

Conditions: E power code with applicable derating

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-rlp25-spec: Section Product Identification table row E power

Fact: fact-rlp25-temperature

Value: -55 to +170 C; power derates above 70 C · Unit: NONE

Conditions: RLP series operation and derating curve

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-rlp25-spec: Section Ratings table row Operation Temperature Range and Figure 5.1 Derating Curve

GUARANTEED_ELECTRICAL

A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.

Fact: fact-rlp25-resistance

Value: 0.2 · Unit: ohm

Conditions: R200 nominal resistance code

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-rlp25-spec: Section Product Identification table row R200

Fact: fact-rlp25-tolerance

Value: 0.01 · Unit: ratio

Conditions: F initial resistance tolerance at reference conditions

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-rlp25-spec: Section Product Identification table row F

Fact: fact-rlp25-tcr

Value: 50 · Unit: ppm/C

Conditions: magnitude, +25 C to +125 C test

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-rlp25-spec: Section Ratings table row Temperature Coefficient of Resistance

TRANSIENT

Behaviour during a short event — startup, a switching edge, a fault or a surge.

Fact: fact-rlp25-overload

Value: 5 · Unit: times-rated-power

Conditions: short-time overload for 5 seconds; post-test resistance shift limit applies

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-rlp25-spec: Section Reliability Tests table row Short time overload

PROJECT_STATE

A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.

Fact: fact-rlp25-manufacturer

Value: TA-I Technology · Unit: NONE

Conditions: exact RLP25FEER200 orderable identity

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-rlp25-spec: title block and Section Product Identification table row RLP25

Fact: fact-rlp25-resistance-min

Value: 0.198 · Unit: ohm

Conditions: minimum initial resistance at reference conditions; TCR and self-heating excluded

Verdict: NEEDS BENCH · Provenance: CALCULATED

Evidence: src-rlp25-spec — CALCULATED: fact-rlp25-resistance times one minus fact-rlp25-tolerance

Fact: fact-rlp25-resistance-max

Value: 0.202 · Unit: ohm

Conditions: maximum initial resistance at reference conditions; TCR and self-heating excluded

Verdict: NEEDS BENCH · Provenance: CALCULATED

Evidence: src-rlp25-spec — CALCULATED: fact-rlp25-resistance times one plus fact-rlp25-tolerance

Fact: fact-rlp25-project-nets

Value: RS1.1=V15; RS1.2=SET · Unit: NONE

Conditions: current generated Board L source

Verdict: NOT APPLICABLE · Provenance: PROJECT-CHOICE

Evidence: src-rlp25-generator: COMPONENTS table row RS1 and NETS rows V15 and SET

Fact: fact-rlp25-worst-power

Value: 0.05462626262626262 · Unit: W

Conditions: upper calculated mean LED current through the same minimum initial 1% resistance that produces that current; TCR, PCB temperature, and pulse loading unresolved

Verdict: NEEDS BENCH · Provenance: CALCULATED

Evidence: src-rlp25-spec — CALCULATED: fact-al8860-current-max squared times fact-rlp25-resistance-min

Fact: fact-rlp25-power-margin

Value: 1.9453737373737374 · Unit: W

Conditions: reference-condition initial-tolerance calculation before PCB/ambient derating and pulse qualification

Verdict: NEEDS BENCH · Provenance: CALCULATED

Evidence: src-rlp25-spec — CALCULATED: fact-rlp25-power minus fact-rlp25-worst-power

Calculation dependencies

These values were derived from other recorded facts rather than read from a document. The expression and every input are published so the number can be recomputed instead of trusted. A derived value is never stronger than the weakest fact it depends on.

Fact: fact-rlp25-resistance-min

Expression: fact_rlp25_resistance * (1 - fact_rlp25_tolerance)

Depends on:

Fact: fact-rlp25-resistance-max

Expression: fact_rlp25_resistance * (1 + fact_rlp25_tolerance)

Depends on:

Fact: fact-rlp25-worst-power

Expression: fact_al8860_current_max * fact_al8860_current_max * fact_rlp25_resistance_min

Depends on:

Fact: fact-rlp25-power-margin

Expression: fact_rlp25_power - fact_rlp25_worst_power

Depends on:

Pin maps

The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.

pinmap-rlp25

  • Symbol: RLP25FEER200

  • Footprint: R2512

  • Pins: 2

Pin assignments
Symbol pinNameFootprint padFunction
1V151high-side supply terminal
2SET2sense terminal

Interactions

Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.

int-al8860-power-stage

  • Records involved: rec-al8860mp-13, rec-rlp25feer200 (this record), rec-fxl0630-330-m, rec-ro-ss26

  • Conditions: full LED-string VF/temperature, V15 transient, layout parasitics, and PWM operating envelope

  • Verdict: NEEDS BENCH

Facts this rests on:

int-rlp25-sense

  • Records involved: rec-rlp25feer200 (this record)

  • Conditions: steady and pulse load with local temperature/derating

  • Verdict: NEEDS BENCH

Facts this rests on:

Cross-component rules

Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.

  • rule-al8860-led-stage — al8860-led-stage — rule verdict: NEEDS BENCH — How the LED driver, its sense resistor, inductor, catch diode and per-branch ballast behave together across the LED forward-voltage, tolerance and temperature envelope.

All cross-component rules

Sources

Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.

High Power Current Sensing Resistors RLP Series

Source ID: src-rlp25-spec · Authority: MANUFACTURER_PRIMARY

FieldRecorded value
Document numberTRLP-250S008L
Revisionnot stated
Document date2024-12-03
Retrieved2026-08-02
Printed page1/8

Locator: Section 3 Product Identification table and Section 5 Reliability Tests table

Availability: AVAILABLE

Document URL: https://www.tai.com.tw/files/uploads/Prod\_spec/RLP25.pdf

Board L generated schematic specification

Source ID: src-rlp25-generator · Authority: PROJECT_GENERATOR

FieldRecorded value
Document numberscripts/schgen/board_l_spec.py
Revision410bc1a342286dd6c205d6dcec0f248b8a963987
Document date2026-08-02
Retrieved2026-08-02
Printed pagesource file

Locator: COMPONENTS table row RS1 and NETS rows V15 and SET

Availability: AVAILABLE

Document URL: https://raw.githubusercontent.com/Takazudo/zudo-led-lamp/410bc1a342286dd6c205d6dcec0f248b8a963987/scripts/schgen/board\_l\_spec.py

Legend

What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.

Verdict

Recorded termWhat it means
NEEDS BENCHCannot be settled from documents. It needs measurement on real hardware before it can be relied on.
NOT APPLICABLEThe parameter does not apply to this part as it is used here.
PASS - primary-source confirmedConfirmed against the manufacturer's own document for this exact part.

Provenance

Recorded termWhat it means
CALCULATEDDerived arithmetically from other facts listed here. The expression and every input are shown, so the number can be recomputed rather than trusted.
PRIMARY-SPECTaken from the manufacturer's own specification document.
PROJECT-CHOICEA decision made by this project. No vendor asserts it.

Fact class

Recorded termWhat it means
GUARANTEED_ELECTRICALA parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.
PROJECT_STATEA value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.
RECOMMENDED_OPERATIONThe range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.
TRANSIENTBehaviour during a short event — startup, a switching edge, a fault or a surge.

Coverage status

Recorded termWhat it means
COVEREDEvery question this domain asks is answered by the facts listed against it.
OPENUnresolved. Open means the question has not been answered, not that the part is unsafe — the reason states what is missing.

Source availability

Recorded termWhat it means
AVAILABLEThe document was retrieved and is on record.

Source authority

Recorded termWhat it means
MANUFACTURER_PRIMARYThe manufacturer's own document for this exact part.
PROJECT_GENERATORA document this project generated, such as a schematic or netlist export.

Identity state

Recorded termWhat it means
UNRESOLVEDThe exact orderable part is not yet confirmed. Substituting a same-name part from another vendor is not permitted on that basis.

Source state

Recorded termWhat it means
SOURCE UNAVAILABLENo document backing this line could be retrieved.

Unit

Recorded termWhat it means
NONEThe value is not a physical quantity, so it carries no unit. Recorded as `NONE`.

Raw agent resource

This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.

Open the owning bundle component-al8860mp-13